See Better with Smart Light
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully
read through this instruction sheet, refer back to them during installation to ensure
your product is fitted safely and correctly. Keep these instructions for
future
use.
WARNING
Risk of Fire and Electric Shock
All fittings must be installed in accordance with current IEE wiring regulations. If in
doubt, consult a qualified electrician.
Switch off the electrical supply at the main circuit board
BEFORE
installation
and
maintenance.
Suitable for indoor use only. This product should be positioned well away from
curtains and fabrics. Never cover the mirror.
Regularly check the cord, the transformer and all other parts for damage. If any
part is damaged the product should not be used.
INSTALLATION SAFETY
Inspect the product immediately upon receipt for the transit damage or missing
parts. Handle the product with care and protect against knocks to all sides
and
edges of the glass.
Ensure there are no hidden pipes or cables in the wall before
drilling.
Wear suitable eye protection when drilling. Take care if drilling on tiled
surfaces
in case the drill slips.
CAUTION
The light source of this product is non‐changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not
meant to cover all possible conditions and situations that may occur. It must be
understood that common sense, caution and care, are factors that can’t be built into
any product. These factors must be supplied by the person(s) caring for and operating
the fixture. Do not install this fixture in hazardous locations.
Hotline:
+1 302 336 8180
Website: https://www.allsumhome.com/
Email: [email protected]
