EXALTA EL-270, Instruction Manual

Page: 14 / 68

14 15
and then should be used very carefully because if
you use it incorrectly or at the wrong temperature it
can easily overheat or even burn the hair. When using
the iron for the first time, always select a moderate
temperature and do a test on a strand to verify that
the selected temperature is suitable for your hair
type.
INSTRUCTIONS FOR USE
Before use, make sure your hair is clean, dry and free of
knots.
Divide the hair into sections before styling strands
starting from the lowest.
Insert the plug into the wall socket via the thumbwheel
switch on the
product and select the desired temperature. The red LED
will start flashing. The red light stops flashing when the
selected temperature is reached. The curling iron is, at
this point, ready to be used, so the red light stays on.
The range of adjustments allows the product to be used
in peace on all hair types, even the most delicate or
difficult.
After use, switch off the appliance and unplug it from the
mains. Allow to cool before storing.
On first use, it is possible that the apparatus will give
off a bit of smoke and a smell: it frequently occurs and
disappears after the next use.
RECOMMENDATIONS FOR USE
Before you curl your hair, comb and separate it into small
sections (Smaller strands create denser, more curly locks
creating larger curls or larger waves).
Squeeze the clamp and position the lock evenly between
the clamp and the iron tube, close the clip by releasing the
lever, and then slide the cylinder onto the tip of the hair.
Grasp the anti-scald point and the handle of the curler,
curl the hair strand around the cylinder from root to tip
GB