Exalt Installation and Management Guide
EX-i Series FDD Digital Microwave Radios
202675-005
91
2011-08-30
Interface Connections
This section provides the pin number assignment and wiring information for the connectors on the EX-
i Series FDD radios. All connectors are shown as viewed from the radio front panel.
T1/E1 Connections
There are two orientations of T1/E1 connections. Channels 1 and 2 have the securing tab towards the
top of the connector while Channels 3 and 4 have the securing tab towards the bottom of the connector.
Figure 61 illustrates the pin orientation and functionality of these connectors.
Figure 61 T1/E1 connectors
Pin
Function
1
Tip Out (from radio)
2
Ring Out (from radio)
3
Ground
4
Tip In (to radio)
5
Ring In (to radio)
6
Ground
7
Unused
8
Unused
Summary of Contents for EX i GigE Series
Page 133: ...202675 005 2011 08 30...
