Exalt Installation and Management Guide
EX-i Series FDD Digital Microwave Radios
202675-005
15
2011-08-30
Figure 9 Primary front panel connectors
Table 2 Front Panel Connectors
Label Type
Gender
Function
T1/E1 (1–16)
RJ-48C
F
Primary ports for User T1 or E1 circuits to
traverse link.
DS3 (IN/OUT)
BNC
F
Primary ports for User DS3 circuit to traverse
link.
OC3 (IN/OUT)
SFP
F
Primary port for User OC3 circuit to traverse
link
ETHERNET
(ETH1 and ETH2)
RJ-45
F
Primary ports for user Ethernet and/or
management data (10BaseT, 100BaseT, or
1000BaseT) to traverse link.
SFP (Ethernet or ETH3) SFP
F
Accepts either a fiber or copper GBIC inserted
for Ethernet and/or management data
(1000BaseF or 1000BaseT).
EXP
RJ-45
F
Expansion port, used for Space Diversity,
MHS, XPIC, and Capacity Aggregation
configurations. Available on select models.
ALARMS
9-pin sub-D
F
External alarm inputs and outputs.
PROT
RJ-45
F
Protection port for MHS configurations.
CONSOLE 9-pin
sub-D
F
Management port (serial) for PC/PDA for
Command Line Interface (CLI)
communications.
GND (Ground)
Bantam
F
Common (return) volt meter test point for
measuring RSL.
RSL Bantam
F
Voltmeter
test
point for measuring received
signal level.
24–48VDC (2)
3-pin modular
M
DC power inputs from DC source or AC
adapter.
(Ground) Threaded
(M5)
receptacle
F
Chassis ground connection (M5 x 0.8 threads).
Summary of Contents for EX i GigE Series
Page 133: ...202675 005 2011 08 30...
