Exalt Installation and Management Guide
EX-r Series GigE Digital Microwave Radios
201872-003
58
2015-10-23
Figure 31 T1 Interface Configuration page
E1 I nterface Configuration Page
This page allows the administrator to enable/disable each individual E1 channel. The AIS can also be
enabled and disabled for each input. If enabled, the radio places an AIS code on the output of the
associated interface if and when the link fails or when there is no E1 signal available from the far end
to provide the user at the local end. Loopback controls are also provided (see
).
Figure 32 E1 Interface Configuration page
