Exalt Installation and Management Guide
EX-r Series GigE Digital Microwave Radios
201872-003
36
2015-10-23
If all other parameters are still configured at their factory default settings, the radios can now be
connected back-to-back to verify that the link is communicating and perform any other desired tests.
See
for test information.
describes each page of the GUI. Most configuration parameter settings are
intuitive. The following link parameters must match at both ends for the link to communicate:
•
Link Security Key (
•
Bandwidth (
)
•
RF Frequency (System Configuration page)
•
Link Distance (System Configuration page)
•
TDD Frame Size (System Configuration page)
•
Polarization (System Configuration page)
Navigating the GUI
The GUI provides the primary interface for all configuration and management. There are three sections
of the main GUI window:
•
Summary status information section (upper-left corner)
•
Navigation panel
•
Main window
Figure 19 Exalt GUI window description
Note:
Changing any of these parameters causes a temporary loss of link. The GUI displays a
warning and provides an opportunity to cancel changes.
SUMMARY STATUS
NAVIGATION PANE
MAIN WINDOW
