Step 5
Plug the ExaBus Cable in the ExaBus Port of the sensor so that it communicates with SYSGuard 6001
Main Unit or SYSGuard 6070 Expansion Module. Confirm that Power LED of ExaBus Port constantly
lights. Press sensor assignment button for 2 seconds, Marking LED of the sensor will light. When
sensor is detected by SYSGuard 6001 Main Unit Marking LED does not light anymore. During this
process ExaBus Port Communication LED blinks 2 times rapidly. As a result of the abovementioned
process, SYSGuard 6020 Temperature Sensor is recognized by the system.
SYSGuard 6001 Layout
SYSGUARD 6001
Main Unit
RS-232
LAN
USB
POWER
READY
RESET
12V 2.5A
Front Panel View
Top Panel View
Rear Panel View
1
2
3
6
5
4
7
8
9
RS-232, GSM Modem Input
USB Ports, For Programming
LAN Port
Status LED
Power Status LED
Sensor / Module Inputs
Montage Hole
Power Input
Reset Button
