background image

4

5

english

english

Safety

Introduction

Safety information

Personal protective equipment

WARNING 
Intoxicants:

Drugs, alcohol, and medications may 
weaken attention, judgement, and/or the 
ability to concentrate. Impaired reflexes, 
unsteady balance, hallucinations, and 
miscalculations may cause serious work-
place accidents such as personal injuries, 
damage to tools and property, or death.

  Never use the tool if you are under 

     the influence of alcohol, intoxicating  
     medications, and/or drugs.

  If you know about, or notice someone  

     using alcohol, drugs, or intoxicating  
     medications, make sure that he or she  
     is not using the tool.

WARNING  
Danger of being caught in moving parts

  Do not wear loose jewelry, clothing, 

     or uniforms. Make sure that possible
     shirtsleeves, shoelaces, and/or pants  
     cuffs cannot be caught by the machine’s  
     moving parts or become entangled  
     with any other object or natural feature  
     at the job site.

  To minimize the danger of choking,  

     make sure that any collar, tie, or hood  
     cannot become entangled with the 
     device, cords, or accessories.

  To minimize the danger of entanglement,  

     make sure that hair and headgear 
     cannot be caught by the device’s 
     moving parts, cords, or accessories.

Personal protective equipment must conform 
to the applicable health and safety require-
ments. Always use the following personal 

protective equipment:
• Hard hat conforming to occupational safety  
 requirements.
• Sufficient hearing protection.
• Safety goggles or visor for eye protection.
• Cut-resistant safety gloves.
• Non-skid safety shoes conforming to 
  occupational safety regulations.
• Breathing  mask.

Installation, use, and 

maintenance: 

precautionary measures

WARNING 
Explosives and flammable materials, 
liquids, and gases: Danger of explosion

If used in explosive atmospheres, the tool 
may cause an explosion and/or fire. 
Explosions are dangerous and may cause 
extremely serious accidents, injuries, or 
death. Because the tool often creates 
sparks while sawing, it must never be used 
near any kind of potentially explosive or 
highly flammable material, liquid, or gas. 
Thoroughly familiarize yourself with the 
national, state-specific, and local safety
instructions related to working near or 
among, explosive materials.

  Never use the tool near explosives or  

     highly flammable materials, liquids, or  
     gases.

  Never work in highly flammable or 

     explosive atmospheres.

  Make sure that your work area has

     no hidden gas sources or explosives.

  If there are explosives, highly flammable 

     materials, liquids, or gases at your job  
     site, make sure that they do not pose  
     a danger and cannot come into contact  
     with sparks created by the saw.

Operating, safety, and 

servicing instructions

You now have the use of a completely new 
type of tool. Developed as a safe alterna-
tive to dangerous tools used to cut round 
pipes, the extremely effective Exact 360 
AIR has been designed to cut various types 
of metals and plastics. It is absolutely 
essential that you carefully read and under-
stand these operating, safety, and servicing
instructions before using the pipe saw. 
Keep this manual conveniently within reach 
of all pipe saw users. Make sure that all 
persons using the saw have read and 
understood the dangers and operating 
instructions specified in this manual, and 
always follow the rules and regulations 
provided by occupational safety agencies. 
The Exact 360 AIR pipe saw is for profes-
sional use only.

Personal safety precautions 

and requirements

Make sure that the job site where you are 
working complies with all national, local, 
and state-specific occupational safety 
regulations. Only trained persons familiar 
with all general safety regulations, as well 
as the possible dangers occurring at job 
sites, may use this tool. Failure to follow 
the instructions specified in this manual 
may cause serious personal injury, damage 
to the tool, or a hazardous situation.

Installation, storage, 

maintenance, and disposal

This tool may be installed, stored, main-
tained, and disposed only by persons who:
• are physically able to handle the size,  
  weight, and power of the device.
• are familiar with all relevant national,  
  state-specific, and local safety regula-
  tions, as well as precautionary measures  
  aimed at accident prevention.
• have read and understood these 
  operating instructions.
• have not ingested alcohol, drugs, or 
  medications impairing alertness or 
  the ability to work.

Use

Only professionally capable persons may 
use this tool.

Users are capable if they:
• are able to handle the size, weight, and  
  power of the device.
• are trained to use this device according  
  to national, state-specific, and local 
 instructions. 
• are familiar with, and understand, all 
  national, state-specific, and local safety  
  regulations, as well as precautionary  
  measures aimed at accident prevention.
• have read and understood this manual.
• have not ingested alcohol, drugs, or 
  medications impairing alertness or the  
  ability to work.

Summary of Contents for PipeCut 360 AIR












Reviews: