eXact PipeCut 170, Operating Instructions Manual

Page: 6 / 22

6
Information
english
Operating, safety, and servicing instructions
Please read this operating, safety, and servicing instructions carefully before using the pipe
saw. Also store this instruction book somewhere accessible to everyone using the pipe saw.
In addition to these instructions, always follow the of fi cial work, health and safety regulations.
The Exact PipeCut 170 Battery is meant for professional use only.
Technical data
Model Pipecut 170 Battery
Voltage 18 V / DC
No-Load speed 3500 r/min
Intermittent operation 1,5 min ON / 8,5 min OFF (S3 15%)
Blade diameter 140 mm (5.51”)
Mounting bore 62 mm (2,44”)
Weight 5,2/6,0 kg (11/13 lbs)
Range of use Ø 15 mm - 170 mm (0,6”- 6”)
Max. pipe wall steel 6 mm (0,23”)
Max. pipe wall plastics 14 mm (0,55”)
Spindle lock YES
Vibration a
h
<2,5 m/s
2
LpA (sound pressure) 86 dB(A)
KpA (sound pressure uncertanity) 3 dB(A)
LWA (acoustic power) 97dB(A)
KWA (acoustic power uncertanity) 3 dB(A)
Noise/Vibration Information
Measured values determined according to EN60745.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN60745:
Vibration emission value a
h
<2,5 m/s 2 , UncertaintyK =1.5 m/s 2 .
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may signi fi cantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may signi fi cantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.