Manual UVC Air Sanitizer V1000E
13.11.2020
Page
29
of
33
7.3.2 Installing new Tubes
1. Carefully place the rubber seal over followed by the coupling nut over the new tube.
2. Gently place the tube with its connector to the socket. In the center of the socket is a
guidance segment that avoids wrong connection. Make sure the guidance segment is
positioned correctly. (Figure 15)
Figure 15 Socket guidance segment and 4 connecting pins
3. Carefully insert the four pin contacts into the corresponding openings in the base at the
front (possibly with the aid of a mirror). Make sure the pins are inserted fully and that
there is no air gap between socket and tube. (Figure 16)
Figure 16 Carefully insert the pin contacts following the guidance segment
4. Carefully tighten the coupling nut by hand onto the socket by turning it clockwise. (Figure
Figure 17 Inserted and coupling nut fixed
