Enter programming mode by long press
C/M
for 2 ~3 second , select EMPLOYEE ->
OK
To delete user
Select DELETE USER REGISTER ->
OK
, select the employee ID ->
OK
, select YES to confirm
To enroll Admin
Method 1
Enter programming mode by long press
C/M
for 2 ~3 second , select EMPLOYEE ->
OK
Select ADD ADMIN->
OK
, assign ADMIN user id , enroll finger print or ID Card / TeleControl
Method 2
Enter programming mode by long press
C/M
for 2 ~3 second , select EMPLOYEE ->
OK
Select VIEW USER->
OK
, select the enrolled user ->OK , go to LEVEL->
OK
, click keypad
2
or
8
change the level from user to Admin
Once ADMIN enrolled, the device will be LOCK admin verification to access programming mode
Operation
To release lock ( Open door from entrance)
Put the enrolled fingerprint to sensor / touch enrolled ID CARD near sensor / press remote control
transmission key button , controller unit will be verified and lock will be release.
To release lock ( Open door from inside building)
Gently turn the release knob behind the unit, lock will be release.
To secure and activate lock ( Door close and lock secure)
Lock device will auto secure by ejecting the shaft when it detecting door close aligned
Lock device will entering sleep mode for power saving while detected no activities within few second
Set Date Time
Enter programming mode by long press
C/M
for 2 ~3 second , click keypad
8
until TIME
SETTING ->
OK ,
choose DATE TIME ->
OK
