Exabyte VXA-2 AUTOPAK1X7, Product Manual, Page: 21 / 104

O
CTOBER
2002 E
XABYTE
VXA-2 A
UTO
P
AK1x7
A
UTOLOADER 13
P
REPARING AND
I
NSTALLING
C
ARTRIDGES
4.
4. 4.
4. Insert cartridges into each slot.
5. 5. 5. 5. Position the magazine so the bottom mounting guide on the magazine (near
cartridge slot 1) aligns with the slot in the bottom of the opening in the
autoloader.
6. 6. 6. 6. Push the top of the magazine in toward the autoloader until it snaps into
place, as shown in Figure 2-5 .
Caution
Avoid touching or opening the cartridge dust cover when handling the cartridges.
Make sure the cartridge is inserted as shown in
Figure 2-4 , or you may damage the
magazine when you place it into the autoloader.
Caution
Do not force the magazine into the autoloader. Forcing the magazine may break
the cartridge slot fingers.
Figure 2-5 Inserting the cartridge magazine