Exabyte 221L, Product Manual

Page: 95 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 79
V
IEWING
S
YSTEM
S
ENSORS
V
IEWING
S
YSTEM
S
ENSORS
The System Sensors screens can assist in troubleshooting hardware problems
by displaying the current status of the library’s internal mechanical sensors.
To view system sensor information:
1. 1. 1. 1. Press
[MENU]
to display the menus. Press the down arrow key until “Library
Information” appears.
2. 2. 2. 2. Press
[ENTER]
. Press the down arrow key until “System Sensors” appears.
3.
3. 3.
3. Press
[ENTER]
. The first screen to appear is Door Locked, as shown in the
example below.
4.
4. 4.
4. To display additional screens, press the down arrow.
Table 5-3 describes the information in the System Sensors screens.
L i b r a r y
I n f o r m a t i o n
S y s t e m
S e n s o r s
D o o r L o c k e d
1
Table 5-3 Information available on the System Sensors screens
System Sensor Description
Door Locked The door is locked (1) or unlocked (0).
Door Closed 1 The first door sensor is on (1) or off (0).
Door Closed 2 The second door sensor is on (1) or off (0).
Cartridge Seated A cartridge is seated in the robot (1) or the robot is empty (0).
Reach Position The robot fingers are closed (1) or open (2).
Magazine 1 Present The right-side magazine is installed (1) or removed (0).
Magazine 2 Present The left-side magazine is installed (1) or removed (0).
EEP Present The entry/exit port (EEP) caddy is installed (1) or removed (0).
EEP Locked The entry/exit port (EEP) is locked (1) or unlocked (0).
X Axis Home The robot is in the home position on the X axis (1) or not (0).
X Axis EOT The robot is at the EOT (end of travel) position on the X axis (1) or not (0).