Exabyte 221L, Product Manual, Page: 32 / 208

16
P
RODUCT
M
ANUAL
1014258
C
HAPTER
2—I
NSTALLING THE
L
IBRARY
4.
4. 4.
4. If you plan to use a cleaning cartridge to clean the tape drive(s), place the
cleaning cartridge in the fixed slot closest to the tape drive(s), as shown in
Figure 2-6 . To use this slot for a cleaning cartridge, you must set the Clean
Slot option during library configuration (described on page 44 ).
Note: If you are using a cleaning cartridge and also set the Max Addressable Slot
option (see page 48 ) to less than 21 slots, place the cleaning cartridge in
the highest addressable slot. For example, if you configure the library to
use 14 slots, place the cleaning cartridge in slot 14. See page 69 for the
cartridge numbering scheme.
Figure 2-6 Installing a cleaning cartridge
Cleaning cartridge
slot (optional)
Caution
Do not use cleaning cartridges other than those approved for LTO Ultrium tape
drives. Using other types of cleaning cartridges will void your warranty.
Carefully follow all instructions and recommendations provided with the cleaning
cartridge.