Exabyte 221L, Product Manual

Page: 31 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 15
P
REPARING AND
I
NSTALLING
C
ARTRIDGES
I
NSTALLING
C
ARTRIDGES IN THE
F
IXED
S
LOTS
1. 1. 1. 1. Open the library’s door, as shown on page 10 .
2. 2. 2. 2. Remove each magazine by grasping the handle and pulling straight out, as
shown in Figure 2-4 .
3. 3. 3. 3. Install cartridges into the fixed slots, with the write-protect switches down
and facing out, as shown in Figure 2-5 .
Note: If your software license limits the number of cartridge slots you can use,
you may need to configure the library to use less than 21 slots (see
page 48 ).
Figure 2-4 Removing a magazine
Figure 2-5 Installing cartridges in the fixed slots
Magazine
handle
Fixed slot