Exabyte 221L, Product Manual, Page: 180 / 208

164
P
RODUCT
M
ANUAL
1014258
C
HAPTER
9—S
HIPPING THE
L
IBRARY
R
EMOVING THE
L
IBRARY FROM THE
R
ACK
If the library is installed in a rack, remove it as follows:
1.
1. 1.
1. From the back of the library, use a T-20 TORX driver to remove the three
screws that secure the retention bracket to the rack shelf, as shown in
Figure 9-1 .
2.
2. 2.
2. From the back, slide the library off of the rack shelf, as shown in Figure 9-2 .
Figure 9-1 Removing the retention bracket
Warning
The library weighs 75.5 pounds (34.2 kg). Two people are needed to move or lift
the library. Most of the weight is toward the back of the library.