Installation instructions GOURMET BASIC
Despite simple Assembly they should only installed by technically savvy Persons.
1. Close the angle-valves on the wall under your sink. (Hot and cold water)
2. Open cold and hot water lines on the faucet. (pressure release)
3. Disconnect the current flexible tube from the angle valve (on the wall) of
the
cold
water
(KW)
4. Screw the EWO vitalizing module (
No.2
) on the outcome of the Filter housing
(
No.1
) - take care for the seal!
5. Connect the flexible tube (
No.6-1
) to the angle valve (cold water - KW) and also
on the entrance of the filter housing
6. Screw the second flexible tube (
No.6-2
) at the open end of EWO VITAL module
and now connect it with the use of the double nipple (
No.7
) to the existing
flexible tube (cold water) of your faucet
7. Attach the filter housing bracket (
No.3
) with the woodscrews at a suitable place
under your sink and screw the filter housing on it
8. Open the angle valves on the wall and check the installation for leakprofeness
9. Open breather-screw (
No.8
) on top of filter housing shortly to eliminate
a possibly existing Air cushion
10. Flush the cartridge a few
minutes to activate it
Now enjoy always
filtered,
vitalized
drinking water!
12
