3
Function specification
3/4
3.3
Remote controls
Only the remote controls described in these operating instructions may be connected!
Plug the remote control into the remote control socket of the welding machine (Chap. 2, J)
and lock it only when the machine is switched off.
The remote control is detected automatically when the welding machine is switched on.
See the operating instructions of the remote control for detailed information.
Foot-
operated
remote control FR 21
Functions
·
The welding current I
1
is adjustable in absolute values from the minimum to the
maximum current depending on the welding current selected on the machine.
Manual remote control FR 30
Functions
·
The welding current I
1
is adjustable in absolute values from the minimum to the
maximum current depending on the welding current selected on the machine.
Manual remote control FR 30F
Functions
·
The welding current I
1
is adjustable in absolute values from the minimum to the
maximum current depending on the welding current selected on the machine.
The welding current I
1
is adjustable in 2 ranges for this
(coarse/fine adjustment)
Features
·
Large adjusting knob
Manual remote control FR 30 PWS
Functions
·
Pole changeover switch to change the welding polarity.
The welding current I
1
is adjustable in absolute values from the minimum to the
maximum current depending on the welding current selected on the machine.
Commissioning:
·
The pole changeover switch of the machine must be in position +.
