Design and function
Transport and installation
14
099-700000-EW501
22.09.2020
5.1.1.2 Transport and storage
Storage in a closed area, temperature range of the ambient air:
• -25 °C to +55 °C (-13 F to 131 F)
[1]
Relative humidity
• up to 90 % at 20 °C (68 F)
[1]
Ambient temperature dependent on coolant! Observe the coolant temperature range of the torch coo-
ling
5.1.2 Settings
After the torch component has been connected, the control elements of the welding machine control are
no longer in operation, other accessories for remote control must not be connected.
Parameter changes are saved immediately and displayed on the welding machine control!
The full functional range of the PM function torch is only available in connection with the device series
Titan XQ and the wire feeder drive XQ.
If the function torch is connected to another EWM device series using Multimatrix, the welding torch swit-
ches to compatibility mode and is restricted in its functions.
Depending on the torch version, the user can change the following welding parameters of the main pro-
grams.
control welding torch
2U/D
RD2
RD3
Program switching
JOB switching
Process switching
Operating mode
Welding method
Wire feed speed
Voltage correction
Dynamics
5.1.3 Operating elements in the machine
This setting affects the torch types 2U/D, and RD2.
Figure 5-1
• Switch the"Program or up/down mode“ changeover switch at the welding machine to the up/down or
program mode position (see chapter "Design and function").
The 'Program or up/down function' changeover switch may look different on your machine. Use
the operating instructions for your power source to operate the switch.
