Machine description – quick overview
Documents which also apply
14
099-M183xA-EW501
15.7.2022
4
Machine description – quick overview
Figure 4-1
Item Symbol
Description
0
1
“Collective interference” signal light
2
“Excess temperature” signal light
3
Welding data display (3-digit)
Displays the welding parameters and the corresponding values
> see 4.1 chapter
4
Push-button for welding parameter display mode / power-saving mode
--------- Welding current
--------- Material thickness
--------- Wire feed speed
Press for 2 s to put the machine into power-saving mode.
To reactivate, operate any control element
> see 5.6 chapter
.
5
Display, JOB
Shows the currently selected welding task (JOB number).
6
JOB-
LIST
Welding task push-button (JOB)
Select the welding task from the welding task list (JOB-LIST). The list can be found in-
side the protective cap on the wire feeder and in the appendix to these operating in-
structions.
7
Welding parameter setting dial
For setting the welding performance, for selecting the JOB (welding task) and for set-
ting other welding parameters.
