Rectifying faults
Resetting JOBs (welding tasks) to the factory settings
099-00L104-EW501
17.01.2022
57
Warning
Possible cause / remedy
38
Incomplete component informa-
tion
Check XNET component management.
39
Mains half-wave failure
Check supply voltage.
40
Weak power grid
Check supply voltage.
41
Cooling unit not recognised
Check the cooling unit connection.
47
Battery (Bluetooth remote con-
trol)
Battery level is low (replace battery)
[1]
only for the XQ machine series
[2]
See technical data for values and other switching thresholds.
8.4 Resetting JOBs (welding tasks) to the factory settings
All customised welding parameters that are stored will be replaced by the factory settings.
Instructions on how to reset welding tasks (JOBs) to the factory setting can be found in the JOB mana-
ger
> see 5.6.2 chapter
chapter.
