Design and function
Transport and installation
18
099-510050-EW501
07.03.2022
5.3 Transport and installation
CAUTION
Risk of accidents due to supply lines!
During transport, attached supply lines (mains leads, control cables, etc.) can cause
risks, e.g. by causing connected machines to tip over and injure persons!
• Disconnect all supply lines before transport!
5.3.1 Ambient conditions
Equipment damage due to contamination!
Unusually high amounts of dust, acids, corrosive gases or substances can damage the machine
(observe maintenance intervals).
• Avoid large amounts of smoke, steam, oily fumes, grinding dust and corrosive ambient air!
In operation
Temperature range of the ambient air:
• -10 °C to +40 °C (-13 F to 104 F)
[1]
Relative humidity:
• up to 50 % at 40 °C (104 F)
• up to 90 % at 20 °C (68 F)
Transport and storage
Storage in a closed area, temperature range of the ambient air:
• -25 °C to +55 °C (-13 F to 131 F)
[1]
Relative humidity
• up to 90 % at 20 °C (68 F)
[1]
Ambient temperature dependent on coolant! Observe the coolant temperature range of the torch coo-
ling
5.4 Configure welding torch
WARNING
Risk of burns and electric shock on the welding torch!
Welding torch (torch neck or torch head) and coolant (water-cooled version) heat up
strongly during the welding process. During assembly work, you may come into touch
with electrical voltage or hot components.
• Wear proper protective equipment!
• Switch off the power source or torch cooling and allow the welding torch to cool!
Switch off the extraction system.
