Cruise Control for Convenience. Please use safely!
Cruise control automatically maintains the current speed. Using cruise control eliminates the need to continually hold the
throttle on those longer rides, while also increasing the overall battery efficiency.
● Engage Cruise Control
After enabling cruise control function, holding the thottle lever for
approx. 7 sec at desired speed will automatically engage cruise
control.
● Disengaging Cruise Control
Once cruise control is engaged, by squeezing, then releasing
the brake lever, will deactivate it.
►
Cruise Control
When cruise control is activated, be prepared to
brake at any time in case of emergency. Cruise
control can only be cancelled via braking, not via
accelerator trigger.
How to Start
Recommend Braking Practices
Before riding, make sure the folding support
handlebar post, are fastening & locked
into position. Make sure handlebar is fully
extended by pulling until lock clicks.
!
Caution
!
Caution
!
Warning
40"
46.5"
(height
adjustable)
Standing platform
Width 7"
Handlebar
Width
21"
Folding (Steps)
Please periodically check the brake cable (connection points, wire damage, twisting, etc.) and drum brake (for excessive wear, loosening
of inner wire) to ensure safe and proper braking function.
Brake Inspection
● At speed, sound may occur from accelerated sections under load (this is torsional vibration), due to vibration from motor
and chassis components. At approx. 6~15 mph, this is a common phenomenon of all rotors at specific rotational RPM (eg.
fans, cars, motor boats, etc.), and is not a product defect. However, in event of continuous noise or overly loud metallic noise,
supporting bolts may have loosened. Please inspect before use.
● After use, the motor & rear drum brake may produce significants amount of heat, pleaes do not touch!
!
Advisory
► Electric Brake Sensitivity Settings
Disabled
Strong
- Charger (2A), Tools for assembly, Mini 4 Pro
* Battery comes pre-installed
►
Contents Checklist
Keep record of VIN
number!
Tools
Charger
Electric Braking on Full Charge
Be aware that electric braking will not
function while device is fully charged, ride
accordingly. Electric brakes will resume
operating as normal when battery is partially
depleted.
Step 1)
Light Button Check
Step 2)
Turning on the Dashboard
Light Button
Step 3) Riding
Step 4) Apply the throttle
Rear Fender
Accelerator Trigger
Brake Lever
Kickstand
Tip
1. Raising handlebar post
3. Unfolding handles
Unfolding (Steps)
Press folding lever
down and raise
handlebar post.
Folding lever
2. Handle T-bar height adjustment
Press the lock groove to
adjust handlebar height,
then lock in place with
the quick-release lever.
Quick-
release
lever
Unfold and raise
handles.
Product
Speedway Mini 4 (
ERT-
0836)
Model
Name
Notes
Motor Type
48V 500W nominal BLDC HUB Motor
Rear-Wheel Drive /
MAX 1300W
Battery Type
48V 15Ah
Lithium Polymer
Battery Capacity
748 Wh
Scooter Weight
36 lbs
Charging Time
6~8 hours*
with regular charger
battery cycle life dependent
Range
(Continuous)
30 miles
165±10lbs rider weight,
15.5 mph (flat, level ground)
Max Speed
28 mph
Max Incline
15 degrees (approx 27% grade)
Max Load
265 lbs
Folding Features
One-touch folding /
Handlebar: one-touch slide & fold
Dimensions
40" x 20.9" x 46.5"
Length x Width x Height
Dashboard
Throttle trigger-mounted
backlit LCD Display
Power On/Off (Battery %, Trip, Odometer,
Time Elapsed, Speed, Volt Meter)
Lights
LED Headlight, Tail-light
Tail-light also functions as Brake Light
Suspension
Front and Rear Suspension
Brake
Drum Brake (Rear)
Built-in electric braking (on/off), regenerative
Tires
8" (200 x 50)
Pneumatic Tire (Front) / Solid Rubber Tire (Rear)
Materials
Aluminum alloy (frame, handlebar),
PP (cover)
Thottle Lever
Handle /
Grip
Handlebar Upper Post
(T-bar)
Rear Wheel Brake Lever
(+Electric Brake)
LCD
Dashboard
1.
If light button is enabled, the dashboard will not
power on, and the Scooter will not start. This is
by design as an anti-theft feature.
* Dashboard will automatically power off after a few
minutes of inactivity. Since the light is also turned off,
completely power off unit (via light switch) before
powering back on.
2. With light button OFF, press and hold the dashboard
power button for 2 sec. to turn unit on. You can now
switch between the different modes: Start, Cruise
Control, Electric Brakes, etc.,.
3. With the kickstand folded up, grip the handles
comfortably while placing one foot on the foot
platform. Please be careful not to place a foot on
rear fender.
4. To set off, gentlely pull the accelerator level. To
brake and/or stop, squeeze brake lever.
Rule 1
Always decelerate before coming to a complete stop. Practice safe
braking by decelerating with rear brake lever first, coming to a gradual
and complete stop.
Rear Brake Deceleration
Rule 2
Extreme hard and sudden emergency braking may cause Scooter to skid
out. Please apply progressive gradual braking. Do not apply extreme
force to the brake lever.
Stop Safely
Rule 3
When you enable the electric brake and set brake strength on dashboard it enhances the effectiveness of the
stopping distance. If enabled, when applying the brake both the motor & drum brake automatically work in tandem.
Electric Braking and Deceleration
1. Folding handlebar stem
2. Retracting handlebar
3. Folding handles
Press folding lever
and fold down
handlebar stem.
Press the locking
groove & push the
handlebar down.
Locking
Groove
Fold down
handles.
Folding Lever
Enhancements
On the Speedway Mini 4, the folding
supports have been upgraded.
Both the front and rear suspension have
been significantly enhanced for improved
riding comfort.
Periodically check front & rear suspensions
for warping or strain (caused by hard
impact while riding), along with tightness of
suspension nuts and bolts.
Note
* Range and max speed may vary according to rider weight, climate, wind resistance, road conditions, hill grade, tire pressure, battery
condition, and overall riding manner.
Electrical Wiring Diagram
QR Code
* Scan QR Code
to download an
electrical wiring
diagram.
Moderate
(1~4 Adjustable)
►
Dashboard Diagnostics
Failure
Type
Diagnostic Method
Solution
②
System Error
*If these error messages appear,
please contact us at support@
ewheels.com
④
Motor Error
⑤
Accelerator Error
⑥
Controller Error
⑦⑧⑨⑩
(Other)
*
①
Displayed when cruise control is engaged.
*
③
Displayed when brake lever is engaged. (Accelerator is disabled)
►
Speed Mode Select
to control
,
►
Main Mode Select
short press
cycle through modes
* If default settings for P0(8), P1(48), P2(15), P3(0) are
changed, correct info will not display.
* In Low Speed(1) mode, changing to Slow Start(P7)
function will not enable feature.
* When battery remaining is 10%, meter will flash 3x every 10 sec. When
battery remaining is 0%, meter will continue to flash non-stop.
enters settings mode
1. Unit measurement - P4 : 0(Km/h), 1(mp/h) displayed
2. Start Mode selection - P5 : 0(instant), 1(kick push start)
3. Cruise Control - P6 : 0(disabled), 1(enabled)
4. Slow Start - P7 : 0(off : power start) ~ 5(smooth start)
5. Max Power Select - P8 : 1 ~ 100
6. Battery Eco Mode - P9 : 1(max), 2(mid), 3(off)
7. Electric Brake Sensitivity Select - PA : 0(disable) ~ 5(strongest)
8. LCD Brightness - Pb : 0(off) ~ 5(max)
8(fixed)
Start Mode
0(instant)
1(kick push)
Slow Start
0(off:power)
~5(slow)
Battery Eco Mode
1(max)
2(mid)
3(off)
Max Power
Select
1~100
Electric Brake
Sensitivity
0(off)
~5(strongest)
LCD Brightness
0(off)
~5(max)
Cruise Control
0(disabled)
1(enabled)
48(fixed)
15(fixed)
0(fixed)
Units (speed)
0(Km/h)
1(mp/h)
Mode
Description
TRIP
Current Trip Mileage (long
press mode button to reset)
ODO
Total Mileage
CHA
(unused)
VOL
Current Voltage
DST
(unused)
TIME
Time Elapsed
►
Dashboard Settings
Speed
Speed Mode
Power
Button
Accelerator
Trigger
Unit of
Speed
Battery Meter
/ Remaining
Charge
Time Elapsed
Mode Button
With dashboard powered on, pressing
will display currently selected
speed mode, and pressing
will cycle through speed modes (3 in total).
Once mode is selected, pressing will
complete the selection.
Turn on dashboard. With
pressed
and held for 2~3 sec., press to enter
settings
mode.
In settings mode, pressing once allows
settings value changes, where
and increase and decrease values.
Setting
Mode
Setting
Value
Battery
(internal)
Charging Port
Front Fender
Headlight
Rear Fender
Taillight (Brake Light)
Quick-Release
Lever
(height adjust)
Front Suspension
Rear Wheel Motor
Rear Suspension
8" Solid Rubber
Rear Tire
8" Pneumatic Front Tire
Rear Suspension Arm
Light
Button
High-strength Retractable
Standing Deck
Folding / Unfolding
Locking Shaft Lever
Handlebar Post
(steering tube)
Specifications
Dashboard Functionality, Cont.
Dashboard Functionality
Getting Started with Your Speedway Mini4 Pro
Getting Started with Your Speedway Mini4 Pro, Cont.
Overview of the Speedway Mini4 Pro
