Ewent EW3948, User Manual

Page: 8 / 112

7 |
ENGLISH
6.0 Installing the UPS
Follow the instructions below to connect the UPS:
1. Shut down the load (for example PC)
2. Put UPS on the proper position
3. Connect load (for example PC) to the UPS
4. Connect the serial or USB cable to the computer and to the UPS.
5. Plug the UPS power cable into a wall outlet.
SUGGESTION: This UPS is the power supply for the computer, monitor and hard
disk(CD) etc. It has a limited backup time for the load, so you'd better not connect a
printer or other equipment to it.
6. Press the ON/OFF button on the front of the UPS to turn it on. You will hear a
short beep.
Remark
：
1. Generally speaking, don't turn off the UPS so the battery keeps charging.
2. When AC fails the UPS will turn to battery mode. Please save important
documents in time.
7.0 UPSilon 2000 software
The EW3948 is supplied with UPSilon 2000 software. This software package enables
you to view the status of the UPS and change multiple settings. During a long lasting
power failure the software will correctly shut down your computer before the battery of
the UPS is drained.