Ewellix TLC 12ZWAK, Installation, Operation And Maintenance Manual, Page: 6 / 22

6
Teles c op ic pillar TLC
6
2.0 Safety
This chapter targets all the users of the TLC telescopic pillar.
It contains information on its safe use and optimal utilization.
2.1 Safety program
The safety program from Ewellix spells out who is entitled to
use it and the responsibility of individual users.
The TLC was designed and built in accordance with the lat-
est technical standards and accepted safety rules.
EU-conformity is documented with the technical
documentation.
2.1.1 Purpose of use of the TLC
The telescopic pillar TLC has been designed and built to be
operated in accordance with its intended use. If you use the
TLC for any use other than that cited, the manufacturer can-
not be held responsible for damage resulting from this.
The TLC has been specifically designed for the movement of
patient tables, instrument carriers, instrument tables, small
lifting tables and dentist's chairs.
2.1.2 Intended Use
The intended use of the TLC is:
• dynamic, compression or tension loaded stroke.
NOTE
Please note:For the operations data, please see the Appendix of
this operating manual (⮑7.0 Appendix, page 16).
2.1.3 Unauthorized use
Any use other than the intended use without the manufactur-
er's written agreement or operation beyond the technical
limits is considered unauthorized.
You can find the technical operating limits in the Appendix
(⮑7.0 Appendix, page 16) of this manual and on the type
plate of the TLC.
NOTE
Please note: Any unauthorized use of the TLC can cause personal
injury and property damage. Always adhere to the instructions of
this manual.
2.1.4 User groups
To ensure safety, we place requirements on the users of the
TLC, that must be adhered to under all circumstances. Only
persons who meet the requirements are entitled to use the
TLC.
We refer to all persons who operate, use, commission the
telescopic pillar, process it further or pass it on for further
processing as user groups. As the requirements of these
user groups strongly depend on their role, we distinguish
between the following user groups:
The operating authority iis the contractual partner of the
person doing the further processing or the reseller. They can
impose legal conditions on the operating authority when
purchasing the telescopic pillar. The operating authority en-
sures that the user is instructed in the authorized use of the
equipment.
The processor is the contractual partner of the reseller or
the manufacturer. He assembles the telescopic pillar into a
complete device. He is authorized by the manufacturer to
use the telescopic pillar TLC in accordance with the regul-
tions and has the necessary expert knowledge.
The technician has the professional technical training to
utilize the telescopic pillar TLC according to its authorized
use. Apart from the chapter on Safety, he is also familiar
with the chapter on Special operating modes. He will find
the required technical data in the Appendix.
The reseller forwards the machine.