-Move at a speed of about 1 minute every 10 sq ft
and follow the diagram for an even finish (Fig.10)
-Do not sweep the polisher from side to side.
-Do not leave the product operating in one area
for a prolonged period as this may damage your
floor
-Once cleaning is complete, turn the unit off by
returning it to its upright position. Polishing /
buffing the floor
-Clean floor thoroughly first before adding your
chosen floor polish / wax
-If you are using an alternative floor polishing
wax or oil to Ewbank® Floor Polish, please refer
to the manufacturer's instructions when using
with the Ewbank® 4-in-1 Floor Cleaner,
Scrubber Polisher & Vac
-Start with the blue cleaning pads initially and
buff to a finish with the yellow pads for a
high-sheen finish
-Keep the polisher moving, do not stop in one
place for a long time or it will spoil the finish
-Once polishing is complete, turn the unit off by
returning it to its upright position
-A glossy finish may not always be possible; this
depends on the polish/wax used and the type of
floor surface. Sometimes several coats of polish
will enable a glossy finish.
Power Cable Storage
-The electrical power cable can be stored on the
rear of the product using the convenient power
cable storage hooks
6
(approx. 1minute per 10 sq
ft
Fig.10
3.3ft
3.3ft
)
-Move at a speed of about 1 minute every 10 sq ft
and follow the diagram for an even finish (Fig.10)
-Do not sweep the polisher from side to side.
-Do not leave the product operating in one area
for a prolonged period as this may damage your
floor
-Once cleaning is complete, turn the unit off by
returning it to its upright position. Polishing /
buffing the floor
-Clean floor thoroughly first before adding your
chosen floor polish / wax
-If you are using an alternative floor polishing
wax or oil to Ewbank® Floor Polish, please refer
to the manufacturer's instructions when using
with the Ewbank® 4-in-1 Floor Cleaner,
Scrubber Polisher & Vac
-Start with the blue cleaning pads initially and
buff to a finish with the yellow pads for a
high-sheen finish
-Keep the polisher moving, do not stop in one
place for a long time or it will spoil the finish
-Once polishing is complete, turn the unit off by
returning it to its upright position
-A glossy finish may not always be possible; this
depends on the polish/wax used and the type of
floor surface. Sometimes several coats of polish
will enable a glossy finish.
Power Cable Storage
-The electrical power cable can be stored on the
rear of the product using the convenient power
cable storage hooks
6
(approx. 1minute per 10 sq
ft
Fig.10
3.3ft
3.3ft
)
6
