5
Assembly
Protect all surfaces with a cover before commencing assembly.
Take all parts out of the packing and put them on an even
surface. Check that all parts listed are included and complete.
1.
Remove the small transit plug from the left had side of the
operating switch by gently pulling out (this plug is just a
temporary part to prevent the unit from switching on when in
transit but can be stored in the aperture on the left-hand side
of the switch when this bung is removed)
2.
Lengthen the extension pole to the height you want, using the
two plastic clips on the pole.
5
Summary of Contents for CDB800
Page 34: ...34 ...
