How to use your Ewbank Cascade
2
3
4
5
6
How to fill
Turn the filler cap at the top of the tank 1/4 turn to the right and
remove (Fig.2).
3
Markings on tank
Add water to the water level marked on the tank then add
shampoo to the shampoo level (Fig.3) for cleaning large areas.
Replace the filler cap and turn 1/4 turn to the left. If
spot cleaning, mix 10 oz. water to 1 oz. shampoo.
Press the handle release
Press down on the top of the handle release button then extend
the handle by gently pulling upwards until handle locks in place
(Fig.4).
Using the trigger
When the handle is locked into position you will feel a
spring loaded action in the trigger (Fig.5).
Cleaning
Squeezing the trigger will release the valve in the head of the unit
allowing the shampoo and water mixture to be applied to the foam
roller. Using short overlapping strokes the mixture will be applied
to the carpet or rug
–
DO NOT OVERWET
the cleaning area (Fig.
6). Releasing the trigger will stop the flow of shampoo/water
mixture, although the roller will remain wet for a time afterwards.
After use, let the carpet or rug dry completely, then vacuum or
use your carpet sweeper to remove the deposits lifted by the foam
shampoo.
Note:
The drying of the carpet generally takes 3-4 hours.
3
