Ewave EWFS2SD3 Instruction Manual Download Page 8

 

8

MANUAL FUNCTION (#8) 

Manual function allows user to set the time flexibly according to personal 
preferences. 

1. 

Select the function by pressing “+” or “-“ to #8. 

2. 

Press “START” and timer will start blinking. Set the desired time by pressing 
“+”. Press “-“ to change the flashing “0” position which will allow user to set 
detailed time. 

3. 

After time has been set, press “START” again to begin cooking. The clock 
will begin to count down. 

 

HOW TO PRE-SET PROGRAMS 

This feature will allow user to pre-set any program for future cooking. A user may 
select the start time and function ahead of time as a preference. 

1.

  Under the condition where LCD is displaying “00:00”, press “PROG”  to 

prearrange cooking.  

2.

  While the “00:00” is flashing on LCD, press “+” to set the time. Press “-“ to 

change the flashing “0” position.  

3.

  After time has been set, press “PROG” again to enter the procedure of 

choosing appointed programs. 

4.

  After a program has been selected, press “START” to start the function and 

the clock will begin to count down 

 
 

Cleaning and Maintenance 

 
COMPLETELY CLEAN AND DRY ALL PARTS AFTER EVERY USE. 

Be sure to unplug the appliance before cleaning. To protect against electrical 
shock, do not immerse cord, plug or unit in water or other liquid. 

 

Never use harsh abrasives, caustic cleaners on the interior surface.  
Wipe dry with clean cloth. For stubborn stains, use a nylon or plastic scouring 
pad or a powdered, non-abrasive cleaner. Dry thoroughly before closing.

 

 

To clean the exterior finish, simply wipe with a clean damp, cloth.  
Re-fit the bowl after cleaning. This keeps the mechanism underneath covered. 
For all other parts, wash by hands and dry thoroughly. 
 
 
 
 

SAVE THESE INSTRUCTIONS 

 

Summary of Contents for EWFS2SD3










Reviews: