background image

Installation Manual MK1900HD Series      

 

 

 

 

 

 

                          

1/11

 

 

 

 

 

 

 

This manual contains information on the installation and maintenance of 
the following Evve Long Range

TM

 products: 

 

1900HD - High Definition Camera System 
 
The information in this manual is subject to change without notice. Please 
refer to our website for the latest information.

 

 
NOTE: All graphics contained within this document, including screenshots and 
other displays, are for reference use only and are subject to change.
 

 

For information on the camera system operation and configuration, 
please see Operation manual MK1900HD Series. The manual is available 
on the Evve Long Range website at: 
www.evvelongrange.com/downloads 

17xxHD - High Definition Demonstration Camera Positioning System 

Copyright 2019 by Evve Long Range B.V (ELR). ELR has intellectual property rights to 
technology embodied in the product described in this manual.  
Evve Long Range

TM

 and Evve International BV

TM

 are trademarkt of BOTHA BV. 

17xxHD - High Definition Demonstration Camera Positioning System 

Summary of Contents for MK-1900HD Series












Reviews: