Xesar 3.0 | V 3.0.216
8 / 11
RS485/422
In the "Remote Address /URL" field, enter the IP address of the PC or server on
which the Xesar software is installed.
It is responsible for the communication between the Xesar network adapter and
the Xesar software. It is important that the remote port (9081 by default) is the
same as that specified in the Xesar Installation Manager (OCH Port).
Figure 7: Xesar network adapter - RS485/422
Network
On the Network page, the fields are to be filled in as shown below.
The IP address defines the IP address of the Xesar network adapter.
Please note: if the address is changed and
Save
is clicked (or by
confirming with the ENTER key) then the network adapter can
exclusively be opened and configured using this address.
Figure 8: Xesar - network adapter - network
