197
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Activating access media blocks at the access component
If you have already blocked a Xesar identification medium in your Xesar software (Section
persons), you must subsequently synchronise all Xesar access components to which this per-
son was authorised to also transfer the changes to the affected Xesar access components.
For this purpose, proceed as described in Section
After having synchronised with your Xesar software, a notification in your Xesar application on
your Xesar tablet in the maintenance tasks indicates
no further tasks
.
All tasks
lists all doors to enable you to implement individual tasks (e.g. battery status), regardless
of the maintenance tasks synchronised in the Xesar software.
Figure 135: Xesar tablet — all tasks
Checking the battery status using the Xesar tablet
You can query the current battery status of your Xesar access component (Xesar handle, escutch-
eon, cylinder) at any time using your Xesar tablet.
For this purpose, connect your Xesar tablet to the affected Xesar access component.
Select the three, stacked rectangles in the top right of the open Xesar application.
Then select
Show battery status
.
Summary of Contents for Xesar 2.0
Page 1: ......