177
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Blocking persons
If an identification medium is no longer available, you can remove the identification medium from
the Xesar locking system by blocking the person which has been assigned this particular identifi-
cation medium. The block will withdraw all identification media from a person and put them on a
blacklist. The blacklist is an automatically created list of all blocked identification media and it is
automatically transferred upon synchronisation with Xesar access components.
If users hold a blocked identification medium to an active coding station or an updated Xesar
access component, this identification medium is automatically deleted (from the system and the
blacklist) and will be denied access to your locking system.
Blocked identification media attempting to unlock access components with an updated blacklist
are also deactivated by the DeleteKey function.
Caution:
The identification medium will only be fully transferred to your Xesar locking system
once you have synchronised the affected Xesar access component with your up-to-
date Xesar tablet.
Proceed as follows to block a
person
(and thus an identification medium):
(Figure 115: Blocking Xesar identification media):
Open the persons list.
Select the
person
whose Xesar identification medium you would like to block.
Click the
Block person
icon next to the selected person's icon.
Click
Block
to confirm the security prompt.
Summary of Contents for Xesar 2.0
Page 1: ......
