EVSEDO-AC011K-AE-25
Page | 18
2021© IPC2U GmbH. All rights reserved
01.01.001.2021/09-en
7.
Malfunctions
7.1.
Intervention
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC
FLASH
•
Do not attempt to open the charging station cover.
•
Do not attempt to repair or replace the charging
cable.
Failure to follow these instructions will result in death or
serious injury.
This charging station contains no user-repairable or user-serviceable parts. Any work on
your charging station must only be undertaken by a qualified person.
1.
The indicator light blinks red when an abnormal situation is detected.
2.
Cut the power to the charging station: in the switchboard, set the dedicated
charging station circuit breaker to OFF.
3.
Unplug the charging cable.
4.
Plug the charging cable back in. The connector must be fully inserted.
5.
Power up the charging station: reset the dedicated charging station circuit
breaker to ON.
6.
If the indicator light does not turn back to green, contact your electrician.
When you contact your electrician, give the full reference for your equipment (model,
catalog number, serial number). This information can be found on the sticker attached to
the side of the equipment.
