EVS Synapse U4D100, Installation And Operation Manual, Page: 17 / 28

#Mode The Mode setting determines if the output signal is down converted or
the input is passed to the output. Settings are:
• Pass (Default)
• Down.
#H-Sharpness With H-Sharpness you can select how much detail enhancement you
want to add. Ranges from 0% to 100%. The Default is 0%.
#H_delay The H-Delay setting allows adjustment of the Horizontal phase of the
output signal with respect to the selected reference input.
The H-Delay setting gives a delay in addition to the reference timing. For
example: if the H-Delay is set to 10 pixels, the output signal will be
delayed by reference 10 pixels. The signal is delayed (advanced)
with respect to the phase of the reference signal. The available range is
from 0 to a maximum of 5124 pixels (dependent on I/O format). The
default setting is 0px. The preset master for this is Out-Frmt, hence the #
prefix.
#V_delay The V-Delay setting allows adjustment of the vertical phase of the output
signal with respect to the selected reference input.
The V-Delay setting gives a delay in addition to the reference timing. For
example, if the V-Delay is set to 10 TV HD lines, the output signal will be
delayed by reference 10 TV HD lines. The signal is delayed
(advanced) with respect to the phase of the reference signal. The
available range is from 0 to a maximum of 1124 lines. The default setting
is 0ln.
#F_delay F-Delay sets the amount of delayed Frames. The available range is from
0 to 7 frames. Default is 0F.
#OSD-Style Selects the style of the On Screen Display text. The following are
possible:
Off
Transp: Enables the text in transparent mode.
Masked: Enables the text in masked mode.
Blink-Transp: Blinks the text in transparent mode.
Blink-Masked: Blinks the text in masked mode.
#Vert-AA-Filt The vertical anti-aliasing filter enables you to minimize distortion artifacts
to give lines a smoother appearance. Options are 0 through 7. Default is
4.
Lock-Mode Lock-Mode determines whether the card is locked to its input input 1), to
the reference (Ref1 or Ref2) or freerun (not locked). By default it is set to
Ref1.
INSTALLATION AND OPERATION MANUAL
Synapse U4D100 | 5. Settings Menu | 9