4. The MGU100 / MGG100 Card
Introduction
SynView is EVS’s next generation Synapse modular multiviewer. The feature set has been increased
tremendously, with double the amount of inputs and up to 8 times the amount of outputs (heads)
UHD/4K/60Hz output resolution on display outputs and a 6-fold increase in processing power.
The system consists of 4 basic models. These versions can be mixed and matched to build a hybrid
multiviewer with up to several hundred inputs and 8 x 1080p heads (on SDI) or 2 heads with UHD/4K
resolution. Multiple connector panels will be available to allow for different I/O configurations.
The specific features of the 4 models are defined below:
Model Name / Application
Differentiation
SDI In
SDI Out
IP Inputs
IP Outputs
PIP
(scalers)
Monitoring
MGU200
Production SDI Inputs
8
8
-
-
16
Basic
MGG200
Production SDI Inputs
8
2
-
-
16
Basic
MGU100
Monitoring SDI Inputs
8
8
-
-
8
Extensive
MGG100
Monitoring SDI Inputs
8
2
-
-
8
Extensive
The above cards have the same output configuration, with up to dual head UHD/4K on dual quad 3Gb/s
SDI (with a 5V powered quad SDI to HDMI converter), or 8 heads on SDI. The cards can be combined in
any combination, with up to 12 cards in the new SFR18 gen3 using the new SMP175 power supply.
With the external Daisy Chain mini SAS-HD connector, you can in theory build a multiviewer with an
unlimited amount of input channels, as you can chain the cards even between frames.
As in the original SynView system, you can split the multiviewer into smaller chunks of cards. An
MGU200 can also be used stand alone as a dual quad-split (or even octo-split) with eight 1080p pictures
spread over 2 UHD screens (pixel mapping with no scaling).
INSTALLATION AND OPERATION MANUAL
Synapse MGU100 - MGG100 | 4. The MGU100 / MGG100 Card |
9
