INSTALLATION AND CONFIGURATION MANUAL
DIO48
16
SourceB1 ~
SourceB4
SourceB1
till
SourceB4
allow you to select what the source
inputs should be. The possible settings differ for each mode. These
are the possibilities per mode:
Dig-Emd
mode: the local input channels
Aes1L
till
Aes4R
are possible.
Dig-di
g mode: the local input channels
Aes1L
till
Aes4R
are possible.
Deemb-Emb
mode: the local input channels
Aes1L
till
Aes4R
and Add-on output channels
Add_on1
till
Add_on4
are possible.
Deemb-dig
mode: the local input channels
Aes1L
till
Aes4R
and Add-on outputs channels
Add_on1
till
Add_on8
are possible.
Modes are set in the setting
In_Out
. The default settings for
SourceB1
till
sourceB4
are respectively
Aes3L
till
Aes4R
Note:
in
Deemb-Emb and Deemb-dig
mode it is possible to
make a selection and combine local channels with ADD_ON
channels.
Note:
If
Deemb–Dig
mode is set,
ADD_ON5
till
Add-On8
are
the required settings if you want to use the card for deembedding.
Gain-A1
The settings menu item
Gain-A1
controls the output gain of
channel 1; the right channel of the first AES/EBU output.
Gain-
A1
has an adjustment range between
–60.0dB
and
+12.0dB
.
When
Gain-A1
is set to
0dB,
the output level is equal to the
input level.
-999 is silence.
The default setting of
Gain-A1
is
0dB
.
Gain-A2
The settings menu item
Gain-A2
controls the output gain of
channel 2; the left channel of the first AES/EBU output.
Gain-A2
has an adjustment range between
–60.0dB
and
+12.0dB
. When
Gain-A2
is set to
0dB,
the output level is equal to the input
level.
-999 is silence.
The default setting of
Gain-A2
is
0dB
.
