INSTALLATION AND CONFIGURATION MANUAL
AAD08
6
3 A Quick Start
Power-up
On powering up the Synapse frame, the card set will use basic data
and default initialisation settings. All LED’s will light during this
process. After initialisation, several LED’s will remain lit – the
exact number and configuration is dependant upon the number of
inputs connected and the status of the inputs.
Default settings
In the default condition, the AAD08 will act as a dual channel 1 to
8 Analogue Audio Distribution Amplifier.
Changing settings
and parameters
The front panel controls or the Synapse Set-Up Software can be
used to change settings. An overview of the settings can be found
in chapter 5, 6 and 7 of this manual.
Front Panel Control
Front Panel Display and Cursor
Settings are displayed and changed as follows;
Use the cursor ‘arrows’ on the front panel to select the menu and
parameter to be displayed and/or changed.
Press
►
To
go forward through the menu structure.
Press
◄
To
go back through the menu structure.
Press
▲
To move up within a menu or increase the value of
a parameter.
Press
▼
To move down through a menu or decrease the
value of a parameter.
NOTE:
Whilst editing a setting, pressing
►
twice will reset the
value to its default.
[No Alarms]
Summary of Contents for Synapse AAD08
Page 22: ......
