EVS LSM-VIA User Manual Download Page 147

Page: 147 / 276

7.2.3.

The Playlist Screen on the Remote Panel
Touchscreen

On the Remote Panel touchscreen, the active playlist is displayed as follows.

Application Bar

Playlist Summary

Playlist Elements

Application Bar (1)

This area is displayed in Live mode, Clip mode, Playlist mode.

See section "LSM-VIA Remote Panel Touchscreen" on page 11.

Playlist Summary (2)

The Playlist Summary features the following information about the active playlist, from left to right:

•

Playlist LSM ID

•

Playlist name (if defined)

•

Number of playlist elements

•

Duration of the playlist

•

Auxiliary audio clip LSM ID and duration (if an AUX clip has been set)

If it is shorter than the playlist duration, this is highlighted in red:

USER MANUAL

LSM-VIA | 7. Working with Playlists |

135

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands