EVS Broadcast Equipment SA
19
Audio_Prst_act
With this item you can manually change the currently active audio
preset. Can be any preset between 1 and 16. By default it is set to 1.
All menu settings that are preceded with a ‘
#Emb
’-prefix are part of
the preset.
Audio_Prst_Edit
Here you can select which of the 16 selectable audio presets you
want to edit. Changing this will not change the active preset, unless
the currently active preset is the same you are going to edit. All
menu settings that are preceded with a ‘
#Emb
’-prefix are part of the
preset.
EMBEDDER
#Emb-AB-Mode
With Emb-AB-Mode you select how the audio in groups A and B
should be embedded into the video:
overwrite
the exsisting
audio, or
Append
. Default is
overwrite
.
#EmbA_Grp
With this setting you select in to which audio group (= 4 audio
channels) of the outputs you want to embed the first 4 forwarded
audio channels coming from the de-embedders. Can be
group1
,
group2
,
group3
or
group4
. You can also choose to not use
these 4 audio channels for anything by setting this item to
off
. By
default it is set to
Group1
.
#EmbA1_Inp ~
#EmbA4_Inp
With these settings you can select where the corresponding audio
channels (channel A1 till channel A4) of the outputs are coming
from. In this card you can only choose to get the audio from the de-
embedder of the active input (
Demb-Input
), or to mute the
corresponding channel (set to
off
). Defaults here are
Off
.
#EmbB_Grp
With this setting you select in to which audio group (= 4 audio
channels) of the outputs you want to embed the second 4 forwarded
audio channels coming from the de-embedders/add-on bus. Can be
group1
,
group2
,
group3
or
group4
. You can also choose to
not use these 4 audio channels for anything by setting this item to
off
. By default it is set to
Group2
.
#EmbB1_Inp ~
#EmbB4_Inp
With these settings you can select where the corresponding audio
channels (channel B1 till channel B4) of the outputs are coming
from. In this card you can only choose to get the audio from the de-
embedder of the active input (
Demb-Input
), or to mute the
corresponding channel (set to
off
). Defaults here are
Off
.
