Button configuration
Device connection
configuration
Function Button
(Mode/Force)
on/off button
planck O1
connect
Basic Operations
Press on/off button to switch on the toothbrush
after it has been woken up.
Brushing Teeth
After waking up your toothbrush, when the LCD
screen is displaying home page and the toothbrush
has not started working:
Selecting Brushing Mode
-
Level by level: the brushing force
will increase to a higher level every
time you press function button.
Note that when the brushing force
reaches the highest safe level, it
will go down to the lowest if you
press function button again.
-
Skip through levels
：
Press and hold function button,
and the brushing force will increase continuously until
you release function button. Note that when the
brushing force reaches the highest safe level, it will go
down to the lowest and then increase again.
Adjusting Brushing Force
Press function button once to enter mode setting
page. Follow the prompts and short press function
button to select the mode.
Press and hold function button to confirm mode and
exit to home page. Press on/off button once to start
teeth brushing.
1
2
When the brush head is vibrating:
Checking Tooth-brushing Data
Press on/off button once to stop the brush head
vibration. The LCD screen will enter “Coverage” page.
Press function button once to enter “Rating” page.
1
2
Press function button again to return to home page.
3
Clean
Adaptive
White
Sensitive
Comfort
Therapy
Note: You can only adjust the brushing
force while using the toothbrush.
