This controller has been designed to only work with EVOVX Ventilation System EC
Fans
Set Temperature Range:
Temperature Resolution:
Operating Voltage/Frequency:
Sensing Element:
Operating Temperature:
Operating Humidity:
Output Control:
Display:
Approval:
EMC Approval:
5 - 35°C
0.5°C
12 - 24 Volt DC
NTC thermistor
0 to 40ºC
5 - 90% non-condensing
Digital control interface
3.5” digital LCD Touchscreen
All relevant AS/NZS standards
All relevant AS/NZS standards
Technical Specifications
Advanced controller functions
•
Turn off your controller with the Power Off button.
•
Press and hold the Ventilation rate adjust button for 5 seconds.
•
Release the button when the screen turns on.
To calibrate your controller's room temperature you need to enter the programming mode
•
Press the Power Off button to return to the home screen.
The temperature calibration value is shown in the middle of the display. Adjust the calibration
value using the Adjust Up and Down buttons.
•
The controller will turn off after 5 seconds of no activity in programming mode.
The
calibration value is added or subtracted (if negative) to the room temperature.
Example:
The room temperature is 22°C and the controller displays 20°C. The
calibration value is -1°C
change the calibration value to 1°C.
•
To lock the controller press and hold the Adjust Up and Down buttons together.
•
The Lock Symbol appears in the middle-left of the display.
•
To unlock the controller repeat as above.
Locking the controller
The unit should be checked and the filter changed at least every 24 months.
Page 4
V1.1:20181005
