7
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for rotary hammer
To prevent hearing loss, wear suitable protective equipment.
Always use the auxiliary handle for maximum control.
Hold the tool only from insulated parts, to avoid electrical shock when accidentaly contact
with hidden wiring or its own cord occur.
In cold weather conditions or if the equipment has not been used for a longer period, let it
warm up for a while by operating at idling speed .This facilitate a good lubrication for proper
operation.
Do not touch accessory after finishing the operation as may be heavily heated
Demolition Hammer is double insulated. This means it has two completely independent types
of insulation that prevents the operator to come into direct contact with the metal cables. This
measure is a high degree of protection against electric shock.
Application
The rotary hammer is intended for personal use for chiselling of : masonry, concrete, stone,
asphalt.. IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Description
1.Dust protecion
2. Locking sleeve
3. Chisel lock
4. Additional handle
5. On/Off switch lock
6. On/Off switch
7. Handle
Assembly
Disconnect the power plug before carrying out any adjustments or maintenance.
Auxiliary handle
For safety reasons you must only use the demolition hammer with the additional handle(4).
This will provide better stability, support and guidance for the chisel.It can be turned into any
required position:
