Evotools 678996, User Manual

Page: 7 / 10

7
General safety measures for electric tools
Working area

Keep the work area clean and well lit. Humidity and dark areas can cause accidents.

Do not use the tool in potentially explosive areas, eg in the presence of flammable
liquids, gases or particles. Electric tools generate sparks that can ignite these materials

Do not leave children or unauthorized persons in the work area.
ATENTION! Always check that the supply voltage matches the
rating on the product card.

Do not twist the power cord of the product.

Do not transport the product by pulling it on the power cord and do not pull the cord to
remove it.

Keep the power cord of the product away from sources of heat, oil stains, grease, sharp
objects, and heat sources.

Check the plug and the power cord regularly and, in the event of damage, call an
authorized electrician for replacement. Do not use the product if the plug and / or the power
cord are damaged

Do not use or store the product in outdoor areas. Protect the product from excessive
humidity environments. The penetration of water inside the product increases the risk of a
short circuit.

Do not open the product casing.

Do not overload the product. It can be used safely if the operating parameters that
characterize it are respected. Do not use the product for any purpose other than that for
which it is intended.
SERVICE

Repairs should only be carried out by authorized personnel by replacing with original
accessories and spare parts in order to avoid accidents due to inappropriate repairs.
Specific safety measures for voltage stabilizer

The electrical shock protection class of the product is I. Connect the product
only to compatible grounding sockets.

Only use the product indoors. These must be dry and well ventilated.

Connect the product to power sources whose voltage and frequency correspond to the
product specifications.

Only connect consumers whose working voltage and frequency correspond to the
product specifications.

Do not overload the product by connecting consumers who develop a maximum power
greater than that specified in the product specifications.

Use the product in well-ventilated areas, away from moisture and direct sunlight.