11
•
Use only the handle for handling and moving the product. Some parts of the product could be
very hot and there is risk of damages.
•
Before switching on the product, check the power cord. If it is damaged, do not use the
product. The product repairing must be done only by authorized specialists.
•
Before switching on the product, place it at a safe distance of people and objects around. Do
not place the product near curtains or furniture. There is risk of ignition.
•
Before switching on the product, check that the product is placed on a solid and stable surface
in order to avoid accidental moves.
•
Adjust the air direction in order to avoid persons and objects around.
•
Do not connect the product to timed sockets. These sockets could switch the product on
accidentally.
•
After switching the product off, always unplug the power cord.
•
Using extension cords is not recommended. If it is absolutely necessary to use an extension
cord, use proper cords, as short as possible and always unfolded.
•
If you use an extension cord, always check it before use. Do not use damaged extension
cords.
•
If you use an extension cord with multiple sockets, do not connect any other product than the
heater.
•
Always supervise the product when it is on.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Application
The product is intended for warming the rooms.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Preparing the product before operating
WARNING! Disconnect the power plug before carrying out any adjustments or
maintenance.
Placing the product
Before switching the product on, place it on a solid and stable surface using the handle (3) at a
safe distance of persons and objects nearby.
WARNING! Do not place the product in potentially explosive environenments
(flamable liquids, gases, dust), near other heat sources or near furniture and
curtains.
WARNING! Adjust the air flow direction in such way that it avoids the persons and objects
around. Place the product at a safety distance of persons and people nearby.
After placing the product, loose the position fixing screws (4), adjust the air flow direction and
tighten the position fixing screws (4).
