6
Do not expose the product to fire.
Do not expose the product to water.
The product must be charged before storing.
Battery and charger safety features.
Over Charging Protection
:this will ensure that the battery is never overcharged.When the
battery has reached its full charge capacity, the charger will shut off, protecting the internal
components of the battery from being damaged.
Over Discharge Protection:
an internal component of the battery pack is an over discharge
protector. This feature will stop the battery from discharging beyond the recommended
lowest safety voltage.
Over Heat Protection:
The battery has an internal Thermister cut off censor which will cease
the charging cycle if the battery becomes hot during the charging process. This Thermister
censor will also stop the battery from operating should the battery become too hot during the
operation of the tool. This can happen when the tool is overloaded or being used for
extended periods of time.Up to 30 min. in cooling time may be required depending on
ambient temperature and operation being performed.
Over Current Protection:
Should the battery be overloaded and the maximum current draw
be exceeded,the battery will temporarily stop working to protect the internal components. The
battery will resume to normal operation once the excessive current draw has returned to
normal safe level.This may take a few seconds.
Short Circuit Protection:
If the battery pack was to short circuit the short circuit protector
would immediately stop the battery pack form operating.This will ensure that no further
internal components of the battery or the tools are damaged.
Application
The product is intended for supplying power to
ONE EPTO
products.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Storage
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Don
’t keep it in plastic bags to avoid humidity build-up.
