background image

Product Specification Sheet

Roam™ RGB 44 Series LED Tape Light 

EVORALIGHT.COM

844.964.1600

[email protected]

04

Safety and Disclosures

Warranty Information

Contact

1. Installation must be in accordance with local and national electrical code regulations.

2. To ensure safety and correct installation, our tapes are intended to be installed by a qualified, licensed electrician.

3. Only install with a Class 2 DC Constant Voltage LED driver to meet UL requirements.

4. Do not install in environment where excessive heat may exist.

5. LED tape lights must be handled with care. Excessive handling, bending, and pressure may damage the product, voiding the warranty.

Do not bend the strip horizontally.

6. Do not install indoor LED tape light products in outdoor / wet location environments. Only use copper wiring. Use wires rated for at least 167°F (75°C) 

and certified for use with external connection of electrical equipment.

7. Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length.

8. Make sure the appropriate gauge wire is installed between driver, LEDs, and any dimmers. When choosing wire, calculate voltage drop, maximum 

amperage rating, and the location ratings on the wire. Improper wire selection and installation could overheat wires, and cause fire.

9. Do not modify product beyond instructions or warranty will be void.

10. We reserve the right to modify and improve the design of our fixtures without prior notice. Although we try our best to order the same colors every 

time, due to changes in technology and phosphors over time, we cannot guarantee to match existing installed fixtures for subsequent orders or 

replacements in regards to product appearance, CCT, or lumen output.

This product has a 15 year limited warranty from the date of shipment. This warranty only includes the main product outlined in this specification sheet and does 

not include the additional accessories that are used as a reference. Complete warranty details for fixtures and additional accessories are available at 

https://www.evoralight.com/ within the Policies section. For warranty related questions please contact product support team at ([email protected]).

Évoralight, Inc. stands behind its products when they are used properly and according to our specifications. When you purchase our products, you are agreeing 

to the terms and conditions outlined in our warranty section. We try our best to make recommendations, but the burden of proper installation, design, and 

maintenance relies on the purchaser. This limited warranty does not include product failures that are the result of: Not using a voltage regulated power supply 

to connect the LED product or controls; Connecting LED products to the wrong output voltage; Improper connection of power supplies, LED products, or controls; 

Connecting LED products or controls directly to any AC power source if they are stated for DC only input; Connecting power supplies backwards to an AC power 

source; Products used in an inappropriate location or in environmental conditions (temperature, humidity, moisture, etc.) outside the normal specified range; 

Water damage to products not specifically sold as waterproof products; Electrical power surges and spikes; Damage from hail, flooding, tornado, fire, wind, 

earthquake, lightning, electrical storm, or any other natural disasters or “force majeure” incidences; Damage caused by a vehicle or other accident; Damage 

caused when transporting the item; Damage to any products that were modified by the user, used for purposes other than as intended or directed, or connected 

to LED systems or components not purchased from Évoralight; Products that have been subjected to misuse, mishandling, misapplication or accident. Products 

used in connection with any components, devices or systems other than those explicitly approved as compatible with Company’s products and listed on 

Company’s website. Excessive wear and tear and/or physical or accidental abuse, loss, or theft. Improper repairs or warranty services performed by someone 

other than Évoralight will void this warranty.

844.964.1600

Limited Warranty

Consumer’s Acknowledgment

[email protected]

@evoralight

@evoralight

Summary of Contents for Roam RGB 44 Series

Page 1: ... Component Ordering Process Voltage LEDs ft Beam Angle Ambient Temp LED pitch Cutting Points Max Run Length in Series LED Size Adhesive Type Dimmable Spool Size 24V DC Input 18 LEDs ft 60 LEDs m 120 Beam Angle 4 F to 104 F 20 C to 40 C 3 4 17 mm 4 100 mm 32 10 ft 10 m 5050 3M VHB 4930 tape IP20 Yes 16 4 ft 5 m or 100 ft 31 m 01 02 03 04 Connector Options Channel Options Driver Options RM44 Length ...

Page 2: ...ith no wire Two Conductor Connector with 36 wire Two Conductor Jumper Connector 6 wire Two Conductor Jumper Connector with no wire SKU Description Wire Gauge Mockup 01 02 03 04 R G B Peel off adhesive here 3M 3M 20 AWG Remove 1 4 of 3M adhesive tape on the back from the end of the strip that you want to connect It must be removed to allow it to fit properly with the solderless connector Double chec...

Page 3: ... 1M Clear Cover Frosted Cover Opal Cover OSL CH A CVR C 1M OSL CH A CVR F 1M OSL CH A CVR O 1M Clear Cover Frosted Cover Opal Cover MAD CH A CVR C 1M MAD CH A CVR F 1M MAD CH A CVR O 1M VIE CH A CVR C 1M VIE CH A CVR F 1M VIE CH A CVR O 1M Clear Cover Frosted Cover Opal Cover Frosted Cover Opal Cover MIL CH A CVR F 1M MIL CH A CVR O 1M 2 Open End Caps 2 Closed End Caps 4 Metal Mounting Clips w Scr...

Page 4: ...ls for fixtures and additional accessories are available at https www evoralight com within the Policies section For warranty related questions please contact product support team at support evoralight com Évoralight Inc stands behind its products when they are used properly and according to our specifications When you purchase our products you are agreeing to the terms and conditions outlined in ...

Reviews: