8
WT.050.580.000.DE.IM.0714
General Safety Instructions
MFC
2.
2.2
Conventions
Note
The following descriptions and symbols are used in this operating
manual to indicate hazards, mandatory instructions and notes:
2.3
General Principles
General Principles
This device corresponds to the state of the art and recognised
technical safety regulations!
This device contains inherent hazards for personnel and
equipment! These hazards are related to live components or
incorrect dosing of chemicals.
Always observe the safety instructions and hazard notes!
Only use this device in accordance with its intended purpose!
Faults which can negatively affect safety must be remedied
immediately!
Picto-
gram
Note
Meaning
Danger!
Immediate danger to life and limb!
If the situation is not handled
properly, death or serious injury
may be the result.
Warning!
Danger to life and limb! If the
situation is not handled properly,
death or serious injury may be the
result.
Caution!
If this warning is not observed,
medium or slight injury or damage
to the equipment may the result.
Warning!
Electrical hazard.
Switch the unit / system off with
the emergency OFF / main
switch...
Please note
These notes facilitate work with
the unit / system.
Summary of Contents for WALLACE & TIERNAN MFC
