Evonicfires Halo Kiruna, Instruction Manual

Page: 21 / 50

21
INSTRUCTION MANUAL ISS. 3 INSTRUCTION MANUAL ISS. 3
The appliance is operated by the E-Smart CLoud App, the main standby power switch to
the E-Smart product is located to the right of the heater outlet, which is marked with a
light bulb image, to activate the product, this switch must be switch to the “ON” position.
The first time the E-Smart product is activated both the illumination and heater will
function, to switch the heater “OFF” simply reduce the room temperature down to 10
degrees on the App control.
Heater unit cut-out - (This is a safety feature, to safeguard against further damage to the
product).
If the airflow is restricted the heater will automatically turn off. This can occur due to
incorrect installation or obstruction.
To reset the heater function:
•
Isolate from the mains power supply.
• Leave product to cool.
• After a suitable cooling down period, remove the obstruction if obstructed, and
check installation.
• After 10 minutes the thermo switch (cut-out) in the heater will reset.
Please note that both the effect fan and heater fan omit a low decibel noise, both of which
are normal operating characteristics.
PRODUCT OPERATION