manualshive.com logo in svg

Evonicfires E-LLUSION Alisio 1150, Instruction Manual, Page: 19 / 34

Share
Download
Evonicfires E-LLUSION Alisio 1150 Instruction Manual Download Page 19

19

EVONIC - 104 INSTRUCTION MANUAL ISS. 9

EVONIC - 104 INSTRUCTION MANUAL ISS. 9

Before installing the appliance please read and take into account the following important 
requirements;

•  Consult a qualified professional to check the structure of the installation site.
•  This appliance has been designed to be installed into either a stud and plasterboard 

wall, or an existing chimney breast.

•  If installing into an existing chimney, make sure to adequately block off the flue.
•  The appliance must never be installed immediately in front of an electrical socket.
•  The appliance must not be installed anywhere that it may come into contact with water, 

i.e. a bathroom.

 INSTALLATION REQUIREMENTS

 

INSTALLATION

 TOOLS REQUIRED

•  Tape Measure
•  Pencil
•  Spirit Level

 CHECKS BEFORE INSTALLATION

We recommend turning on the appliance before installation, connect the appliance to a 
power source using the provided electrical lead, and depress the right side of the rocker 
switch.

•  Screwdriver
•  PZ2 Screw Bit
•  Screws (Supplied)

Summary of Contents for E-LLUSION Alisio 1150



































Reviews:

No comments